EasyManuals Logo

Cobra LRH5024V User Manual

Cobra LRH5024V
19 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
11
Important:
To protect the battery against deep
discharging, when the battery charge is low,
the hedge trimmer will automatically switch off
via a protective circuit. The hedge trimmer will
stop.
Do not continue to press the on/off switch after an
automatic shut-off of the hedge trimmer. The
battery may be damaged if excessively discharged.
Recharge the battery before continuing to use the
hedge trimmer.
6. STARTING AND OPERATING
Step 1Firstly press the power key (Source) until
the “ECO” light is illuminated
Step 2Pre the lock (1) then press down the
handle trigger (2), the blades will operate at a low
speed
Step 3If you want to change from the low speed
position to high speed position press the
“TURBO” button. The hedge trimmer will now
operate at high speed.
To switch back to the slower speed press the
“ECO” button.
Please Note: When releasing the switch and the
motor stops, there may be a small spark visible
from the motor housing. The spark is caused by
the motor brake engaging.
The best cutting effect is achieved when holding
the blade at an angle to the hedge of approx. 15°.
The opposite rotating knives cut on both sides,
and it is therefore possible to trim the hedge in
both directions.
The sides of the hedge are trimmed using curve
shaped movements from the bottom and upwards.
Source
TURBO
ECO

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cobra LRH5024V and is the answer not in the manual?

Cobra LRH5024V Specifications

General IconGeneral
BrandCobra
ModelLRH5024V
CategoryTrimmer
LanguageEnglish

Related product manuals