Operation
7
Note
While the TALK button is
depressed you cannot
receive incoming calls.
Note
Your incoming “Call” signal
level is dependent on your
unit volume setting.
Talking To
Another Party
Push and release CALL button.The unit you
are calling will hear a two second ringing tone.
Talking To Another Party
Hold mic about
2 inches from
mouth. Speak in
a normal voice.
Release TALK
button and listen
for response.
Push and hold
TALK button.
The TX/RX indicator
will be displayed.
1 2
3 4
3
Operation
6
Calling Another Party
To alert another party that you wish to
communicate:
Turn on your microTALK® 2-way radio.
An audible “tone” will indicate the unit is on.
Select a channel
by pushing the
CHANNEL button
up or down.
Calling
Another
Party
1
2
To Next Page
Loading...
