Set-Up Routines
Nothing Comes Close to a Cobra
®
31
30
English
Set-Up Routines
Conrmation Tone
The Confirmation Tone sounds when your CobraMarine VHF radio is turned On
and to confirm all button presses except for the Talk button. If you would prefer
not to hear the Confirmation Tone, you can turn it Off and On as you choose.
To Turn The Confirmation Tone On Or Off:
1. Enter the Settings menu and scroll to
KEY TONE
with the Up/Down soft keys or the Up/Down channel
buttons.
2. 2. Press the ENTR soft key and observe the current
confirmation tone setting —
ON or OFF.
3. Use the Up/Down soft keys or the Up/Down channel
buttons to switch to the setting you want.
4. 4. Press the ENTR soft key to select the setting. Or press
the EXIT soft key to
EXIT without making changes to the
Key Tone setting.
5. The radio will return to the settings menu. The radio will
remember the saved Key Tone setting, when powering off
the radio, or disconnecting power to the radio.
U.S.A./International/Canada Channel Maps
Three (3) sets of VHF Channel Maps have been established for marine use in the
U.S.A., Canada, and the rest of the world (International). Most of the channels are
the same for all three (3) maps, but there are definite differences (see table on
pages 66 through 78). Your radio has all three (3) maps built into it and will operate
correctly in whichever area you choose.
To Set Your Radio For The Area In Which You Will Be
Using It:
1.
Enter the Settings menu and scroll to CHANNEL
MODE
with the Up/Down soft keys or the Up/Down channel buttons.
2. Press the ENTR soft key and observe the current channel
mode setting —
USA,INTERNATIONAL, or CANADA.
3. Use the Up/Down soft keys or the Up/Down channel
buttons to switch to the setting you want.
4. Press the ENTR soft key to select the setting. Or press the
EXIT soft key to
EXIT without making changes to the
Channel Mode setting
5. The radio will return to the settings menu. The radio will
remember the saved Key Tone setting, when powering off
the radio, or disconnecting power to the radio
Time Adjust
All VHF, DSC, and GPS activities use a 24-hour clock and Universal Coordinated
Time (UTC) which was formerly known as Greenwich Mean Time (GMT). Time
Adjust uses your built-in GPS to gather time input. Time Adjust will allow the radio
to display the time as Local time or UTC time. For time input to be converted to
local time, you need to enter the hour offset of your local time zone from Greenwich.
(See world city time zone chart on page 80). You can also choose to have the time
displayed in a 12 or 24 hour format
To Change The Time Offset:
1. Enter the Settings menu and scroll to
TIME ADJUST
with the Up/Down soft keys or the Up/Down channel
buttons.
2. Highlight the TIME OFFSET option in the menu.
3. Press the ENTR key and observe the current setting.
4. Use the Up/Down soft keys or the UP/Down channel
buttons to change the setting for your local time zone.
5. Press the ENTR soft key to select the setting. Or press
the EXIT soft key to
EXIT without making changes to the
Local Time Zone setting.
6.
The radio will return to the Time Adjust menu. The radio
will remember the saved Local Time Zone setting, when
powering off the radio, or disconnecting power to the radio.
To Select UTC or Local Time Display:
1. Enter the Settings menu and scroll to
TIME ADJUST
with the Up/Down soft keys or the Up/Down channel
buttons.
2. Highlight the LOCAL TIME option in the menu.
3. Press the ENTR key and observe the current setting.
4. Use the Up/Down soft keys or the UP/Down channel
buttons to change the setting for how the radio will
display the time (UTC or Local).
5. Press the ENTR soft key to select the setting. Or press
the EXIT soft key to
EXIT without making changes to the
Local Time setting.
6.
The radio will return to the Time Adjust menu. The radio
will remember the saved Local Time Zone setting, when
powering off the radio, or disconnecting power to the radio.
Operating Your Radio Operating Your Radio
Soft Keys
Up/Down Buttons
To Next Page
Loading...
Need help?
General
