Customer Service
Use the supplied template to mark and cut an opening in the at surface.
CAUTION
Before cutting, be sure the area behind the at surface is clear of any instruments
or wires that might be damaged in the process.
Use la plantilla suministrada para marcar y cortar el agujero en la supercie plana.
PRECAUCIÓN
Antes de cortar, compruebe que no haya instrumentos o cables en el área detrás
de la supercie plana, que puedan resultar dañados durante el proceso.
Product Service
Product Service
•
If you have any questions about operation or installing your
new CobraMarine VHF product, or if you are missing parts…
Please call Cobra rst! DO NOT RETURN THIS PRODUCT TO THE STORE!
See customer assistance on page A1.
If your product should require factory service, please call Cobra rst before sending
your radio. This will ensure the fastest turn-around time on your repair. You may
be asked to send your radio to the Cobra factory. It will be necessary to furnish the
following to have the product serviced and returned:
1. For warranty repair include some form of proof-of-purchase, such as a mechanical
reproduction or carbon of a sales receipt. If you send the original receipt, it cannot
be returned.
2. Send the entire product.
3. Enclose a description of what is happening with the radio. Include a typed
or clearly printed name and address of where the radio is to be returned.
4. Pack radio securely to prevent damage in transit. If possible, use the
original packing material.
5. Ship prepaid and insured by way of a traceable carrier such as United Parcel
Service (UPS) or Priority Mail to avoid loss in transit to: Cobra Factory Service,
Cobra Electronics Corporation, 6500 West Cortland Street, Chicago, Illinois 60707
U.S.A.
6. If the radio is in warranty, upon receipt of your radio it will either be repaired
or exchanged depending on the model. Please allow approximately three (3)
to four (4) weeks before contacting Cobra for status. If the radio is out of warranty,
a letter will automatically be sent informing you of the repair
charge or replacement charge.
If you have any questions, please call 773-889-3087 for assistance.
MRF77_MANL_OPERATION.indd 84-85 5/7/15 2:06 PM
To Next Page
Loading...
Need help?
General
