33
Nothing Comes Close to a Cobra
®
VHF Mode Programming
ROG
VHF
Roger Beep Mode
VHF
Call Tone Select
VHF Marine Radio Protocols
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
Operating Your Radio
32
English
VHF Mode Programming
Call Tone Select
This setting will allow you to transmit a unique
Call Tone alert to identify your radio when you transmit
messages. You can select from one of 10 different
Call Tone signals.
To Set Call Tone:
1. From the previous press of the Call/Enter/Setup button,
the matrix will display CALL TONE SELECT and the
display will flash the current Call Tone number (01
through 10).
2. Press the Channel Up/Down button to select a different
Call Tone. An example of each call tone will sound for
1.5 seconds.
3. Press Call/Enter/Setup button to save this entry and
move to the next Setup mode programming.
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
NOTE
Call Tones are not usually used for Marine VHF
communications. We allow you to turn it On for your
unique communication needs. It is only compatible with
other Cobra VHF radios.
Roger Beep Mode
In Roger Beep mode, your listener will hear an audible tone
when you release the Talk button. This alerts your listener that
you are finished talking and it is OK for them to speak.
To Set Roger Beep On or Off:
1. Display will show ROG icon flashing and the matrix will
display ROGER BEEP ON or OFF.
2. Press Channel Up/Down button to select ON or OFF.
ROG will be displayed when On.
3. Press Call/Enter/Setup button to save this entry and
move to the next Setup mode programming.
Key Tone Mode
In Key Tone mode, an audible tone will sound each time a button
is pressed or you change a setting.
To Set Key Tone On or Off:
1. Display will show Key Tone icon flashing and matrix will
display KEY TONE ON or OFF.
2. Press Channel Up/Down button to select ON or OFF.
3. Press Call/Enter/Setup button to save entry.
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
NOTE
Once set, this is a global setting when in all
radio modes.
Key Tone Mode
Rewind On/Off
If Rewind is enabled, the last 20 seconds of incoming audio
is recorded and you can play back missed VHF calls by
pressing the Rewind button.
1. Display will show the Rewind icon and the matrix will
display REWIND ON or OFF.
2. Press Channel Up/Down button to select ON
or OFF.
3. Press Call/Ent/Setup button to save entry.
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
NOTE
Once set, this is a global setting when in all
radio modes.
Channel 16 Priority Mode
If Priority 16 is turned on, during channel scan the radio
will frequently check the Channel 16 Safety and Distress
channel for calls.
To Set Priority 16 On or Off:
1. The display matrix will show PRIORITY 16 ON
or OFF.
2. Press the UP or DOWN button to select On or Off.
3. Press Call/Ent/Setup button to save entry.
MEMSAMEVOX HI
ROG
VHF
GMRS
T
R
X
U
Channel Up/Down Button
Rewind Enable
VHF Marine Radio Protocols
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
Operating Your Radio
VHF
Channel 16 Priority
To Next Page
Loading...
