41
Nothing Comes Close to a Cobra
®
40
English
VHF Marine Radio Protocols
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
Operating Your Radio
GMRS Mode Programming
VHF Marine Radio Protocols
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
Operating Your Radio
GMRS Mode Programming
To Set DCS Code Entry:
1. Display will show DCS icon and OFF icon flashing.
NOTE
If DCS was previously set to a Code number,
display will show the current GMRS channel
and flash the DCS icon and Code number.
2. Codes begin at 01 and go to 38, followed by OFF, and
return back to 01 again. The last used GMRS channel will
be shown in the large digit display.
NOTE
If CTCSS is On, then DCS will be Off. If DCS is On,
then CTCSS will be Off. The radio does does this
automatically.
3. Press Channel Up/Down button to change code number,
or press and hold Channel Up/Down button to rapid
advance (scroll).
4. Press Call/Enter/Setup button to save entry and move
to the next setup programming mode.
MEMSAMEVOX HI
ROG
VHF
GMRS
T
R
X
U
Channel Up/Down Buttons
MEMSAMEVOX HI
ROG
VHF
GMRS
T
R
X
U
Call/Enter/Setup
CTCSS Off
Voice Activated Transmit (VOX) Mode
In VOX mode, your radio can be used “hands-free,”
automatically transmitting when you speak. You can also set the
VOX sensitivity level to fit the volume of your voice and avoid
transmissions triggered by background noise.
To turn VOX Mode On or Off:
1. Display will show VOX icon and ON or OFF flashing.
2. Press Channel Up/Down button to select ON or OFF.
3. Press Call/Enter/Setup button to save this entry and
move to the next setup programming mode.
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
NOTE
Once set, this is a global setting when in all
radio modes.
To set VOX Sensitivity Level:
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
NOTE
VOX sensitivity level is only visible when VOX is On.
1. The display will show VOX LEVEL and 01 will be
flashing.
2. Press Channel Up/Down button to change volume level
of your choice. Remember, this selection is your voice
sensitivity level during hands-free operation.
05 - indicates a Low (quiet) voice setting.
03 - indicates a Medium voice setting.
01 - indicates a High (loud) voice setting.
3. Press Call/Enter/Setup button to save this entry and
move to the next setup programming mode.
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
NOTE
VOX will be turned Off automatically when the radio is
turned Off. This will avoid accidental transmissions.
VOX
GMRS
VOX Mode
VOX Level
MEMSAMEVOX HI
ROG
VHF
GMRS
T
R
X
U
Channel Up/Down Buttons
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
To Next Page
Loading...
