Cobra MR HH450 DUAL - Weather Mode Programming; SAME FIPS Code Programming; SAME FIPS Code Programming continued

42
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
Operating Your
43
Nothing Comes Close to a Cobra
®
English
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
Operating Your
Use the Cobra exclusive Rewind-Say-Again
®
feature to replay or
record the last 20 seconds of an incoming audio transmission.
Example 1:
When engine noise, music or conversation creates too much noise
to hear an inbound message clearly, press the REW button to hear
the message a second time.
Example 2:
When listening to an urgent distress message of an excited caller
with confusing background noise, press the REW button to hear
the message a second time and get life saving information. Use
this feature to record call details including position coordinates,
call signs, registration numbers and store details that will help
authorities locate the distressed vessel.
MEMSAMEVOX HI
ROG
VHF
GMRS
T
R
X
U
Rewind Button
SAMEMED
VHF
GMRS
Playback Message
GMRS Mode ProgrammingGMRS Mode Programming
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
NOTE
Hold the Rewind button to lock the recording memory (the
Rewind icon flashing) and save the currently recorded
transmission.
Roger Beep Mode
In Roger Beep mode, your listener will hear an audible tone when
you release the Talk button. This alerts your listener that you are
finished talking and it is OK for them to speak.
To Set Roger Beep On and Off:
1. Display will show ROG icon flashing and the matrix will display
ROGER BEEP ON or OFF.
2. Press Channel Up/Down button to select ON or OFF. ROG will
be displayed when On.
3. Press Call/Enter/Setup button to save this entry and move to
the next Setup mode programming.
ROG
GMRS
Roger Beep Mode
GMRS
Key Tone Mode
Key Tone Mode
In Key Tone mode, an audible tone will sound each time a button is
pressed or you change a setting.
To Set Key Tone On and Off:
1. Display will show Key Tone icon flashing and the matrix will
display KEY TONE ON or OFF.
2. Press Channel Up/Down button to select ON or OFF.
3. Press Call/Enter/Setup button to save this entry.
Call Tone Select
In Call Tone mode, you can select the tone the radio will use
when transmitting a Call.
1. The display will show Call Tone Select and the current tone
number will be flashing.
2. Press Channel Up/Down to select the tone you want
to use.
3. Press Call/Enter/Setup button to save this entry and move
to the next Setup mode programming.
GMRS
VibrAlert Select
GMRS
Call Tone Mode
VibrAlert Select
This setting will allow you to select whether your radio activates
the VibrAlert shake in addition to the incoming call tone when
receiving a call. Once the radio shakes, it will delay 20 seconds
before shaking again to eliminate excessive VibrAlerts on a busy
GMRS channel.
To Set VibrAlert:
1. From the previous press of the Call/Enter/Setup button, the
matrix will display VIBRALERT OFF.
2. Press the Channel Up/Down button to select VIBRALERT ON.
The VibrAlert icon will be activated on the display.
3. Press Call/Enter/Setup button to save this entry and move
to the next Setup mode programming.
MEMSAMEVOX HI
ROG
VHF
GMRS
T
R
X
U
Channel Up/Down Buttons
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
NOTE
Once set, this is a global setting when in all
radio modes.
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
NOTE
Once set, this is a global setting when in all
radio modes.
Rewind On/Off
If Rewind is enabled, the last 20 seconds of incoming audio is
recorded and you can play back missed VHF calls by pressing the
Rewind button.
1. Display will show the Rewind icon and the matrix will display
REWIND ON or OFF.
2. Press Channel Up/Down button to select ON or OFF.
3. Press Call/Ent/Setup button to save entry.
Programming these features will allow your radio to listen to
MEMSAMEVOX HI
ROG
VHF
GMRS
T
R
X
U
Call/Ent/Setup Button
GMRS
Rewind Enable
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
NOTE
Once set, this is a global setting when in all
radio modes.