MARINE SETUP MODE
From Marine Standby:
Push and hold Setup key for 3 seconds. (Enters Setup Mode)
LCD is cleared of all Icons except those relevant to each setup step.
UIC CHANNEL MAP SELECT
Turn ON "U", "I", and "C". Flash current channel Map.
Use channel UP or DOWN keys to change setting.
Push Setup Key to save setting and move to the next setup item.
ROG BEEP ON / OFF
"ROG))" and "ON" or "OFF" are flashing
("OFF" is the default setting).
Use channel UP or DOWN keys to change setting.
Note: This is a global setting (all radio modes).
Push Setup Key to save setting and move to the next setup item.
To Next Page
Loading...
