EasyManuals Logo

Cobra MT250C User Manual

Cobra MT250C
47 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
Figure 28
Figure 29
Cranking The Engine
When starting the engine, make sure
the cutting attachment is well clear
of bystanders, pets or objects. The
attachment may rotate during startup.
WARNING!
CAUTION!
CAUTION!
Never operate the pole pruner unless
a cutting attachments is installed.
The recoil starter can be damaged
by abuse.
Always engage the starter before
attempting to crank the engine.
Never pull the starter cord to its
full length.
Always rewind the starter cord
slowly.
1.Place the unit firmly on the ground,
making sure it is stable and that the
cutting attachment is free and clear
of any bystanders or objects, Hold
onto the hand grip on the outer tube
with your left hand grasp the starter
rope handle with your right hand.
See Figure 28.
2.Pull the starter handle slowly until
you feel the starter engage.
3.Pull the starter handle quickly to
start the engine.
When The Engine Starts Or Fires
Open the choke by moving the choke
lever down. See Figure 29.
11

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cobra MT250C and is the answer not in the manual?

Cobra MT250C Specifications

General IconGeneral
BrandCobra
ModelMT250C
CategoryTrimmer
LanguageEnglish

Related product manuals