Cutting on a work platform:
The unit's long reach enables cutting to be performed next to the trunk without the risk of
the work platform damaging other branches.
The tool angle in this case depends on the position of the branch.
Typical applications
Standard cut:
The most convenient working position is a
tool angle of 60°, but any other angle may
be used to suit the situation concerned.
Cutting above obstacles:
Thanks to the unit's long reach it is
possible to prune branches that are
overhanging obstacles, such as rivers or
lakes.
The tool angle in this case depends on the
position of the branch.
35
To Next Page
Loading...
Need help?
General
