Cobra ODE - Connecting Usb Storage; Types of USB Cables Included in the Cobra ODE Kit

Cobra ODE User Manual v2.0
5
2.2 Connecting USB storage:
There are two USB connectors on the clip on PCB, a full size USB A connector (J1)
for connection of mass storage devices and a Mini USB B (J3) connector for optional extra
power input. As shown in the photo below. Please connect your USB mass storage device
to the USB A connector.
Figure 2.2: Clip-on PCB of Cobra ODE (with USBs encircled).
2.2.1 Types of USB cables included in the Cobra ODE kit
· USB 2.0 Mini USB Y cable
· USB 3.0 Y cable
· USB extension cable
The USB 2.0 or USB 3.0 Y cable may be coupled with the USB extension cable and
connected to a port on the front of the PS3 and then to the CLIP on USBA A connector and
your hard drive, in cases where a standard USB cable cannot supply enough power.
Alternatively and preferably use a 1A 5V wall USB charger (Samsung, HTC…).
The QSV version of Cobra ODE does not include the USB cables.