When first unboxing your power station, plug it into a suitable AC outlet until it is fully charged.
After that, in order to get the most out of your power station’s battery life, make sure to
recharge your power station after using it or before putting it into storage.
Different Ways To Recharge Your Power Station
There are multiple ways to recharge your power station, but every method requires
plugging into the power station’s “INPUT” charging port. When your power station
is charging you will see an input power value on the LCD display as well as the input
LED light blinking green indicating that the power station is charging. When charging
is complete the blinking green LED will turn solid green and your battery charge percentage on the
LCD display will show 100%.
1. AC Outlet: Using the included AC charging cable, plug the AC plug into any suitable
electrical outlet and plug the other end of the cable into the power station’s input
charging port to begin charging.
2. 12V DC: Using the included 12V charging adapter, connect the 12V end of the cable
into any suitable 12V DC socket and plug the other end of the cable into the power
station’s input charging port to begin charging.
3. Solar Charging: The Cobra Power Station can be recharged with any compatible
solar panel. Connect the output power cable of a compatible solar panel to the input
charging port to begin charging via solar. Charging times will vary for solar depending
on current weather and time of day. Solar panels are not included with the Cobra Power
Station.
When your power station is recharging, the battery status indicator on the LCD display will ash and
the battery ll ll up with solid bars depending on how charged the power station battery is.
1 Flashing Bar: 0-20% Charge
1 Flashing Bar and 1 Solid Bar: 20-40% Charge
1 Flashing Bar and 2 Solid Bars: 40-60% Charge
1 Flashing Bar and 3 Solid Bars: 60-80% Charge
5 Solid Bars: 100% Charge
In addition to the LCD display on your power station, there is an input charging light
above the input charging port to help provide additional feedback for when you should
recharge your power station:
Blinking Green: When your power station is plugged in and recharging, the input
charging light will blink green to indicate that the unit is actively charging.
Solid Green: When the power station is fully charged the input charging light will change
from blinking green to solid green until the charging cable is removed.
Solid Red: When the battery charge drops below 20% the input charging light will
illuminate solid red. Recharge your power station as soon as possible in order to keep
the battery healthy.
Re-Charging Your Power Station
5
100%
0-20% 20-40% 40-60% 60-80%
To Next Page
Loading...
Need help?
General