5.2 ADJUSTMENT FOR AN APPROPRIATE ANGLE
1. Screw out the locking knobs which fixed the lower handle. (Fig.3A)
2. Move the lower handle up or down, adjust it to the proper height. There are 2 adjusting heights to be choose
on the lawn scarifier; at 2 height, lower handle to the ground is highest, 1 height is the lowest.
3. Adjusting to the proper height, then fix the lower handle using the locking knobs.
WARNING: The left side and right side of lower handle must adjust to the same height.
Fig.3A
1.3 MOUNTING AND DISMOUNTING THE GRASS CATCHER
To fit: Raise the rear cover and hitch the grass catcher on rear of scarifier. (Fig.4A/Fig.4B/Fig.4C).
To remove: Grasp and lift the rear cover, remove grass catcher.
WARNING: Before you ever hook the grass catcher to the scarifier, you must ensure that the engine is
stopped and the cutting unit is not rotating.
Fig. 4A Fig. 4B Fig. 4C
5.4 STARTER HANDLE
Move the starter handle from the engine to the rope guide. (Fig.5)
Fig.5
To Next Page
Loading...