Page 13
Pictures are for illustration purpose only. Your model may or may not have all the features.
CONTROL PANEL
OPERATING FROM THE CONTROL PANEL
The Control Panel enables you to manage all the main functions of the appliance,
but to fully exploit its potential, you must use the remote control.
TURNING THE APPLIANCE ON
• Plug into the dedicated electrical outlet.
• Press the
button until the appliance comes on. The last function active when
it was turned off will appear.
* Never turn the air conditioner off by unplugging from the outlet. Always press
the power button
, then wait for a few minutes before unplugging. This
allows the appliance to perform a cycle of checks to verify operation.
Note: Before pressing Power button make sure the condensate drain plug in the
rear of the unit is securely in place to avoid any leaking.
• Press the MODE button until the light corresponding to the required Mode
lights up.
SET UP & USE
COOL FANDEHUMIDIFY HEAT
Heat models
ENGLISH
Fan
Power Button
Display
Area
Dry Heat
Cool
Fan Speed
Indicator Light
Full Tank
Indicator Light
Swing
Button
Decrease
Button
Increase
Button
Timer
Button
Mode
Selection
Button
Sleep
Button
Speed
Button
CBPAC815H
To Next Page
Loading...
Need help?
General
