RADIO MODE
Basic Operation
Set the MODE switch to the “On” position to turn the radio on. (To
turn the radio off, set the MODE switch to the “Off” position.)
Set the BAND switch to:
AM: Listen to AM broadcasts.
FM: Listen to FM broadcasts.
Tuning
Turn the Radio Tuning Dial to tune to a desired broadcast station.
The current station is displayed by the Radio Tuning Indicator/
Radio Frequency Band.
Reception
For FM broadcasts, extend the FM antenna fully and adjust its posi-
tion for best reception (the FM wire antenna is located on the rear
of the unit).
For AM broadcasts, the unit should be positioned for best signal
strength (the AM antenna is built into the unit).
1.
2.
To Next Page
Loading...
Need help?
General
