Coby CRA79 - Digital Projection AM/FM Alarm Clock User Manual

Page 6 Coby Electronics Corporation
English
www.cobyusa.com Page 7
Clock Operation
Setting the Clock
Set the SETTING switch (5) to the TIME position. 1.
To set the hour, rotate the set dial clockwise until the 2.
correct hour displays.
To set the minute, rotate the set dial counterclock-3.
wise until the correct minute displays.
Once the time is displayed correctly, move the 4.
SETTING switch to the RUN position to conrm. The
display will stop ashing.
Setting the Projector
Note: This feature creates a time display projection on
the ceiling or wall or a darkened room. The projector
clock operates independently of the rest of the unit;
setting the digital time display will not affect the projec-
tor display time. You must set the projector display
time manually.
Extend the projector unit and aim the front lens at 1.
a wall or other surface. Adjust the FOCUS knob until
the projected display appears in focus. You may need
to dim the lights in order to see the display clearly.
To set the hour, hold down the T (time) button while 2.
simultaneously pressing the H (hour) button until the
desired hour is displayed.
To set the minute, hold down the T (time) button 3.
while simultaneously pressing the M (minute) button
until the desired minute is displayed.

Coby CRA79 - Digital Projection AM/FM Alarm Clock Specifications

General

Brand	Coby
Model	CRA79 - Digital Projection AM/FM Alarm Clock
Category	Clock Radio
Language	English