Coby CRA79 - Digital Projection AM/FM Alarm Clock User Manual

Page 8 Coby Electronics Corporation
English
www.cobyusa.com Page 9
Alarm Functions
Setting the Alarm Time
Set the SETTING switch to the ALM position. 1.
To set the alarm hour, rotate the set dial clockwise 2.
until your desired hour displays.
To set the alarm minute, rotate the set dial counter-3.
clockwise until your desired minute displays.
Once the desired alarm time is displayed correctly, 4.
move the SETTING switch to the RUN position to
conrm. The display will stop ashing.
When setting the clock or alarm time, do not ro-
tate the set dial too quickly. Doing so may cause
the unit to register your time settings incorrectly.
Wake to radio
Once the alarm time is set, make sure the radio is tuned
to the correct station and desired volume level. Set the
POWER switch to the AUTO position to set the alarm.
Wake to buzzer
Once the alarm time is set, rotate the VOLUME dial to the
right until it clicks into place at BUZZ position. Set the
POWER switch to the AUTO position to set the alarm.

Coby CRA79 - Digital Projection AM/FM Alarm Clock Specifications

General

Brand	Coby
Model	CRA79 - Digital Projection AM/FM Alarm Clock
Category	Clock Radio
Language	English