To Next PageTo Next PageHow to turn on Coby MP-C7052 when it has no power?
If your Coby MP3 Player has no power, ensure that the power switch on the back of the unit is in the "ON" position. Also, the battery level may be too low, so charge the unit.
What to do if Coby MP3 Player is not recognized by computer?
If your Coby MP3 Player is not recognized by the computer, try the following: * Check the USB connections. * Try switching to a different USB port. * Go to the player's “SETTINGS” and change the "Online Device" setting from Media Device to USB Disk.
What to do if I get a video conversion error on my Coby MP-C7052?
If you experience a video conversion error on your Coby MP3 Player, ensure that the original file plays on your computer. If it doesn't, you may need to obtain the necessary codec for that file. Also, the format might be unsupported.
Why is there no sound after file transfer on my Coby MP3 Player?
If there is no sound after transferring files to your Coby MP3 Player, ensure that the headphones are securely attached to the player. Also, make sure your WMA files are not DRM protected. An unsupported file format (ACC, WAV, M4A…Etc.) could also be the cause.
What to do if music does not play or Coby MP3 Player freezes?
If music does not play or your Coby MP3 Player freezes, ensure that your WMA files are not DRM protected. The files may also be corrupted or damaged, or the file format might be unsupported (ACC, WAV, M4A…Etc.). It could also be an unknown file (WMA file with DRM) or a request for DRM Time (WMA file with DRM).
General| Audio Formats Supported | MP3, WMA |
|---|---|
| FM Radio | Yes |
| USB Interface | USB 2.0 |
| Battery | Rechargeable Lithium-ion |
| Display | 1.8-inch TFT LCD |
