Connecting to a Computer
If you are using Windows 98 SE, you must install the USB driver contained
on the supplied Installation CD. Please see the USB Driver Installation sec-
tion for more information.
To connect to a computer:
Make sure the player is turned off.
Remove the USB Cap and plug the MP-C833 directly into your computer’s
USB port. It may take Windows several minutes to recognize and set
up the device the rst time it is connected depending on your hardware
conguration
Your player will be detected as a “Removable Disk” when you open
“My Computer”.
You may choose to use a USB extension cable to connect to a
computer.
Transferring Music to Your MP-C833
Connect the MP-C833 to a computer.
Open the computer’s le browser (e.g., “Windows Explorer”).
Select the music les to transfer and drag-and-drop them onto the “Remov-
able Disk” icon that represents your MP-C833.
You may also transfer les from your MP-C833 to a computer.
Do not disconnect the MP-C833 or otherwise interrupt the le
transfer process. Doing so may corrupt your les and/or the
player’s rmware.
Please refer to the documentation that came with your computer
or operating system for more information and support regarding
music transfer and le management over a USB connection.
1.
2.
1.
2.
3.
GETTING STARTED
To Next Page
Loading...
Need help?
General
