To Next PageTo Next PageWhat to do if my Coby TFDVD1995S2 has no power?
If your Coby Flat Panel TV has no power, ensure the unit has been powered on manually. Also, check if the power cord is properly connected to the power outlet and that the main power switch is on.
What to do if my Coby TFDVD1995S2 Flat Panel TV remote control does not work?
If the remote control for your Coby Flat Panel TV isn't working, try these steps: * Ensure the POWER button on the unit has been turned on manually. * Remove any obstacles between the remote and the TV. * Point the remote towards the remote sensor on the TV. * Check the batteries are loaded with correct polarities and replace them if necessary.
What to do if my Coby Flat Panel TV has no picture?
If your Coby Flat Panel TV shows no picture, try changing the TV channel. Check that the system connection is proper and secure, and inspect the connection cables for any damage.
What to do if my Coby Flat Panel TV is malfunctioning?
If your Coby Flat Panel TV is malfunctioning, unplug the player for 30 minutes. After that, power on the player, and the restore function should reset it.
What to do if picture and sound are interfered on my Coby Flat Panel TV?
If the picture and sound on your Coby Flat Panel TV are interfered, verify that the system is properly connected. If you're using an antenna, try adjusting it.
General| Screen Size | 19 inches |
|---|---|
| Display Technology | LCD |
| Built-in DVD Player | Yes |
| Resolution | 1440 x 900 |
| Aspect Ratio | 16:10 |
| Contrast Ratio | 500:1 |
| Speakers | 2 x 3W |
| Inputs | Composite, HDMI |
Key warnings about electrical shock, fire hazards, and proper usage.
Advice on preventing fire/shock, handling power, and device response to discharge.
Comprehensive numbered list of safety rules for installation, use, and maintenance.
Covers grounding, power cords, placement, and environmental factors.
Explains the purpose of each numbered button on the remote control.
Instructions for battery installation, operation distance, and usage notes.
Connecting cables, powering on, selecting TV mode, and channel scanning.
Navigating system menus and adjusting picture parameters.
Instructions for inserting discs and controlling DVD playback.
Functions for starting, pausing, stopping, and repeating playback.
Configuring Power Resume, Screen Saver, Password, and Rating.
Solutions for common issues like no power, no picture, no sound, or remote problems.
