Classified - Confidential
• SPECIAL STEPS FOR BOOST EQUIPMENT:
o Check ingredient quantity and enjoy by date. PLEASE NOTE: An ingredient can be
used 15 days past the enjoy by date printed on the BIB. Replace if necessary.
o If the Boost tray contains BIB brand beverage (ie, Barq’s Old Style Root Beer),
pour each BIB beverage for 3 seconds each
o If the Boost tray contains NNS beverages (low calorie drinks), no additional pours
are needed
o If the Boost tray contains both BIB brand beverage (ie, Barq’s Old Style Root
Beer) AND NNS beverages, pour each BIB beverage for 3 seconds each
NOTE: If any ingredients will not pour, verify that the cartridge is not empty by checking the
ingredient remaining information on the dashboard. If it is not empty and a drink still will
not pour, it may be necessary to repeat the nozzle injector ring steps as discussed in the
"Unclog the Nozzle" section.
Additional Cleaning Step
• Perform daily cleaning and sanitization of the nozzle ring and tip.
Taste Test
• Taste several beverages
NOTE: Carbonation requires cold temperatures. If the ice maker was turned off or the
manual fill bin empty, it may take a few hours before the drinks taste like they have enough
carbonation.
Assistance
Should you need assistance completing any or all these tasks, please call the MyCokeTech
support line at 1-800-318 -COKE (2653) and ask to speak with a Senior Technical Advisor. Senior
Technical Advisors are ready to help 24/7/365 with Phone Fix & Video Chat!
To Previous Page
Loading...
Need help?
General
