Classified - Confidential
Water and Carbonation Systems
The following internal and backroom components illustration may be helpful in identifying
equipment during this next section of procedures.
• IN THE BACK ROOM:
o Turn on water
o Plug in the water booster
o Ensure the C02 valve is turned on
• AT DISPENSER:
o If the dispenser is powered off, the door will need to be opened manually to
access the power button:
▪ Engage the manual door release at the lower left of the bottom door. A
screwdriver or other sturdy tool that fits in the hole can be used. Once
the bottom door is open, there is a manual door release at the bottom
left of the upper door. The power button is at the lower left just inside
the top door.
To Next Page
Loading...
