Quick guide for Android connectivity
Cochlear
™
Baha
®
6 Max
Sound Processor
Streaming phone calls
Once paired, phone calls can be streamed directly
to the connected sound processor.
When the sound processor connects, it should
become the default audio streaming destination.
When you make a phone call, a menu automatically
pops up allowing you to select where audio should
be streamed.
When you receive a phone call (or during a
phone call), you can press the “Bluetooth” icon
(g. 9) on the screen and select where audio
should be streamed.
Re-connecting to your smartphone
The device will disconnect from your sound
processor when you turn o the sound processor,
when the sound processor battery level is too low,
or when you are out of range.
To automatically reconnect, make sure the sound
processor has sucient battery power and your
sound processor is within range of the device.
You should hear a series of beeps in the sound
processor conrming the connection.
If the connection is not automatically re-
established, you may need to unpair your sound
processor and repeat the pairing sequence.
Pairing to bilateral sound processors
To stream audio to two sound processors
simultaneously they need to be bilaterally paired.
If you don’t know if your sound processors are
bilaterally paired, contact your and ensure that your
two sound processors have been congured as a left
and a right device and that Control Sync is ON.
fig. 9
3
To Next Page
Loading...
