Cochlear
™
Baha
®
Remote Control
Quick guide for Baha
®
users
Using the Remote Control
Remote Control displays
Deactivate the key lock, then press the
streaming button.
If your sound processor is paired with
more than one wireless accessory
press once, twice, or three times to
toggle between the accessories.
If you cannot connect to your wireless
accessory, move closer and try again.
Note: To save battery consumption,
the remote control display will
automatically switch off after 5 seconds.
Simply, press any button to turn back on
and then make your adjustment.
Stop streaming and return to
programme 1
Stop streaming and return to the
previous program
Activating streaming
The batteries are low and need
to be replaced.
The Phone Clip is active. The Key Lock is activated.
Slide the Key Lock button on the side of the
Remote Control to unlock.
Deactivating streaming
Screen examples
Connected to the second
wireless accessory
Cannot find the
wireless accessory
Searching for the
wireless accessory
Connected to first
wireless accessory
Phone
B
Support
For full details about the Cochlear Baha Remote Control, please refer to the User Manual.
For full details about the Cochlear Baha 4 Sound Processor, please refer to the User Manual part A.
For further support and videos, visit the Cochlear website: www.cochlear.com
To Next Page
Loading...
