Cochlear Baha - Page 3

Cochlear
™
Wireless Remote Control
Quick guide for Baha
®
users
Pairing with your Baha 4 Sound Processor
A
Switch off your Baha 4 Sound Processor:
B
Remove the battery door from
your remote control.
Press the pairing button on the Remote
Control once using the tip of a pen or
similar object.
C
The ‘search’ icon will display on the screen
and the Remote Control will now be in
pairing mode for 20 seconds.
D
While pairing mode is active, switch on your sound processor:
E
Ardium, Baha, Baha Divino, Baha Intenso, Baha PureSound, Baha SoftWear, DermaLock, Vistafix and WindShield are either trademarks or registered trademarks of Cochlear Bone Anchored Solutions AB. Cochlear, Hear Now. And
always and the elliptical logo are either trademarks or registered trademarks of Cochlear Limited. © Cochlear Bone Anchored Solutions AB 2014. All rights reserved. JAN14.
Manufacturer:
Cochlear Bone Anchored Solutions AB
Konstruktionsvägen 14, SE - 435 33 Mölnlycke, Sweden
Tel: +46 31 792 44 00 Fax: +46 31 792 46 95
www.cochlear.com
F
Successful pairing will be indicated by an audible melody
played in the sound processor.
E82991A
By opening the
battery door and
removing the battery.
By pressing the
“off/volume down”
button.
OR
By inserting the
battery and closing
the battery door.
By pressing the
“on/volume up” button.
OR