Cochlear CP1110 - Change microphone cover

Care
Nucleus 8 Sound Processor User Guide 67
Water, sand and dirt
Your sound processor is resistant to water, sand and dust.
However, it is still a precision electronic device so you should
take the following precautions.
If your processing unit ever gets wet, dry it
with a soft cloth.
Then remove the battery module (and
disposable batteries if used), dry them and
the contacts with a soft cloth, and replace
them.
Remove the microphone cover and place
your processing unit in the dry aid kit
provided by Cochlear for 8 hours.
SeeBatteries on page 15
SeeChange microphone cover on page 69
If sand or dirt ever enters the processing
unit, shake the components carefully to
remove it.