Cochlear CP1110 - Sound quality issues

Troubleshoot
80 Nucleus 8 Sound Processor User Guide
Problem Resolution
The sound processor
switches o
1� Ask your clinician if “Auto power o” is
enabled. If it is, then the sound
processor will switch o after two
minutes when not connected to the
implant.
2� Change the batteries. SeeReplace the
battery module on page 19
orCharge rechargeable batteries on
page 23.
The sound processor
will not turn o
1� Check the sound processor is not
locked. SeeLock the control button on
page 32.
2� Remove the battery module from the
processing unit. SeeRemove the
battery module on page 19.
You are not sure
what sound
processor beeps or
light ashes mean
SeeLights and beeps on page 73.