FIELD PROGRAMMING MODE – with NITROX DIISABLED: Contacts 1, 2, & 3 are for
programming sequences.
To begin the programming sequence:
1. Turn the unit on;
2. Using a coin or other highly conductive metal, briefly bridge Contacts 1 and 2 until
a short beep is heard and the Programming Menu is seen in the display.
Figure 11
FIELD PRO G RAM M ING
(S e tting C onservatism )
(S e tting 10'sdigit)
(N o N itro x F u n c tions)
Conservatism 1 5 %
34
To Next Page
Loading...
