USER MANUAL EN
43
Thank you for choosing COCOMM DT200 device. This phone is
designed for being used with GSM 900/1800, UMTS 900/2100 MHz,
LTE FDD B1/2100MHz, B3/1800MHz, B7/2600MHz, B20/800MHz
and LTE TDD B38/2600MHz networks and for operation requires
a valid SIM card from your network operator. Please consult your
network operator for more information.
Security instructions
Please read following instructions carefully before you start using
your COCOMM DT200 telephone:
• Keep this manual for future reference.
• Keep the phone away from moisture.
• Place the phone on a stable surface before start using.
• If the device has been exposed to moisture, has been knocked or
damaged, or has obvious signs of breakage, have it checked by a
qualied service technician.
• Do not place the phone at a distance of less than 1.5 m from a
water source.
• Do not use the device in areas where there is risk of explosion.
Introduction
To Next Page
Loading...
