Troubleshooting
Problem Solution
No power when ON • Check the power plug is connected to the back of the unit
and then plug into a power outlet.
• Check that the outlet is switched on.
• Check that the POWER button on the front of the unit has
been pressed.
No sound • Turn up the master volume dial.
• If playing from an external audio device, ensure the volume
is turned up above 80%.
CD Player does not work • Check your disc is not scratched or dirty.
• Check the CD lens is clean. If dusty, blow clean air across
the lens to remove the dust. If problems persist, use a CD
lens cleaner to clean the CD compartment.
• Check there is no moisture inside of the unit. Allow to dry
before use.
• Ensure the protective card has been removed from the CD
tray.
• Try a dierent CD.
No sound when connected
to a TV
• Ensure component or AV is selected as the source for your
TV audio.
• Ensure the colour coded RCA cables are correctly inserted
into their respective jacks.
• Turn up the volume of the TV or home theatre.
Lyrics do not appear on
screen
• Ensure the colour coded RCA cables are correctly inserted
into their respective jacks.
• Ensure you are playing a CD+G. Audio CDs will not display
lyrics.
• Ensure the CD+G LED is lit to conrm a CD+G format disc
is playing.
To Next Page
Loading...
