User Manual I Primelase I 12
• ISO 7000 – 3082 - Information
Manufacturer’s symbol.
Contains the manufacturer’s information.
Located on the main label on the rear of
the device.
• Door/cabin symbol IEC60825-1 –
Information
Located on the device next to the door/
cabin on the rear, indicates that the device
allows the connection of cabin door open-
ing detection.
• IEC60825-1 Laser emission stop sym-
bol – Information
Located on the front of the device next to
the STOP button, indicates that the emis-
sion of laser radiation stops immediately
once said button is pressed.
• IEC60825-1 Laser aperture symbol –
Information
Located on the sapphire tip of the appli-
cator which comes into contact with the
skin, indicates the window through which
laser radiation is emitted from the device.
• Marking 1 – Information
Marking that certies the conformity of the
device with regards to the applicable Eu-
ropean community directives.
Located on the main label at the bottom
rear of the device.
• ISO 7000 – 2498 – Information
Serial Number
Present in the main label of the device.
Indicates the serial number of the device
manufactured due to correctly identify
the product.
Technical warnings
and general precautions
• External device labelling 1 –
Information
This label is located on the rear of the de-
vice next to the power connector, in com-
pliance with the requirements established
by harmonised IEC standard 60601-1
for the basic safety of electronic medical
equipment.
Graphical symbols for medical devices,
in accordance with the ISO 15223-1 har-
monised standard.
• External device labelling 2 –
Information
This label is located on the rear of the de-
vice next to the power connector, in compli-
ance with the requirements established by
harmonised IEC standard 60825-1 for the
basic safety of laser emission equipment.
0051
To Next Page
Loading...
