Cocraft HC16 - Product Description and Components; Compressor Operation; Component Identification

ENGLISH
7
1
2
3
4
5
6
7
8
9
10
11
Product description
Thecompressor pump compresses theair and discharges it into thepressuretank.
Whentheair pressure in thetank reaches max, apressure switch switches off
themotor driving thecompressor. Asafety valve releases theair in thepressure tank if
thepressure switch fails to turn themotoroff.
Thecompressor is oil-free, which means that it is intended for intermittent
operation. Thismeans that is must only be used to drive smaller pneumatic tools, such
as nail guns, to inflate smaller items, such as footballs, or to drive apaint sprayer, such
as anairbrush. Itis not intended to inflate large objects, such as pools and large air
mattresses, where it needs to operate for along time (over 120 seconds).
1. Mainslead
2. Safetyvalve
3. Pressuregauge
4. [ ON/OFF ] Power switch
5. Carrying handle
6. Holder for mains lead (one on each side)
7. Motor housing
8. Air outlet
9. Working pressure adjustmentknob
10. Pressuretank
11. Drainvalve