To Next PageTo Next PageWhy does my Cocraft Saw run slowly?
If the Cocraft Saw runs slowly, avoid applying excessive force on the blade during cutting; allow it to operate at its own speed. Also, examine the blade for wear and replace it if needed.
General warnings and instructions for safe power tool operation, including electric shock and fire prevention.
Guidelines for maintaining a safe and well-lit work area to prevent accidents.
Precautions regarding power tool plugs, grounded surfaces, and cord usage to prevent electric shock.
Guidelines for operator alertness, protective equipment, and preventing unintentional starting.
Instructions on how to use the power tool correctly and maintain it for safe operation.
Instructions for performing repairs and maintenance by qualified persons using original spare parts.
Detailed safety guidelines for performing cutting operations with the circular saw, including hand placement and blade use.
Explanation of kickback and how to avoid it through proper handling, positioning, and using correct blades.
Check lower guard for proper closing before each use. Do not operate the saw if lower guard does not move freely and close instantly.
Check guard for proper closing before each use. Do not operate the saw if guard does not move freely and enclose the blade instantly.
Information on vibration emission levels, measurement methods, and factors affecting exposure.
Explanation of essential safety symbols found on the product and in the manual.
Instructions on how to safely switch the circular saw on and off using the power switch and lock button.
Guidance on using the spindle lock mechanism to secure the spindle for blade changes.
How to operate the lever to open the saw blade guard for access.
Information about the automatic operation of the LED work light when the tool is plugged in.
Procedure for adjusting the cutting depth of the circular saw using the locking lever and markings.
Instructions for setting and securing the parallel guide for accurate ripping cuts.
How to adjust and set the desired bevel angle for angled cuts using the locking knob.
Step-by-step guide for safely removing and installing a new saw blade.
Guidelines for cleaning, maintaining, and storing the circular saw.
Common operational issues with the circular saw and their potential solutions.
Technical details including voltage, power, speed, dimensions, and weight.
General warnings and instructions for safe power tool operation, including electric shock and fire prevention.
Guidelines for maintaining a safe and well-lit work area to prevent accidents.
Precautions regarding power tool plugs, grounded surfaces, and cord usage to prevent electric shock.
Guidelines for operator alertness, protective equipment, and preventing unintentional starting.
Instructions on how to use the power tool correctly and maintain it for safe operation.
Instructions for performing repairs and maintenance by qualified persons using original spare parts.
Detailed safety guidelines for performing cutting operations with the circular saw, including hand placement and blade use.
Explanation of kickback and how to avoid it through proper handling, positioning, and using correct blades.
Check lower guard for proper closing before each use. Do not operate the saw if lower guard does not move freely and close instantly.
Check guard for proper closing before each use. Do not operate the saw if guard does not move freely and enclose the blade instantly.
Information on vibration emission levels, measurement methods, and factors affecting exposure.
Explanation of essential safety symbols found on the product and in the manual.
Instructions on how to safely switch the circular saw on and off using the power switch and lock button.
Guidance on using the spindle lock mechanism to secure the spindle for blade changes.
How to operate the lever to open the saw blade guard for access.
Information about the automatic operation of the LED work light when the tool is plugged in.
Procedure for adjusting the cutting depth of the circular saw using the locking lever and markings.
Instructions for setting and securing the parallel guide for accurate ripping cuts.
How to adjust and set the desired bevel angle for angled cuts using the locking knob.
Step-by-step guide for safely removing and installing a new saw blade.
Guidelines for cleaning, maintaining, and storing the circular saw.
Common operational issues with the circular saw and their potential solutions.
Technical details including voltage, power, speed, dimensions, and weight.
General| Type | Circular saw |
|---|---|
| Voltage | 230 V |
| Blade diameter | 185 mm |
| No-load speed | 5500 RPM |
| Max cutting depth at 90° | 65 mm |
| Weight | 4.2 kg |
| Power | 1200 W |
