Coda 07X - Installation Connections

Illustrated below is the rear panel of the 07X. The connections are standard and typical of any
audio preamplier. Any unknown features should be adequately explained by the function
descriptions on the following page.
Both sets of balanced receptacles on the le side are identical stereo outputs suitable for
connection to multiple ampliers. The two sets of balanced receptables on the right side
are separate input channels.
Make sure during installation that the AC power connections are interrupted to the
preamplier and all other components are o. While the diagram may be self
explanatory, we strongly recommend that you read the front panel description
on the following page for use instructions.
3
INSTALLATION CONNECTIONS
BALANCED 2
PROCESSOR OUT
BALANCED 1
LEFT
RIGHT LEFT RIGHT
LEFT RIGHT
LEFT RIGHT LEFT RIGHT
LEFT
RIGHT
RIGHT
LEFT
BALANCED 2
RIGHT
LEFT
BALANCED 1
LEFT RIGHT
DISC AUX PROCESSOR IN UNBALANCED OUT