III. Remote Control
The AMPLIFIER 10.5 may be operated by remote control. To operate, set the universal
remote to
AUX
. The provided universal remote can be used to control other Coda
products as well as many other audio and video components. For instructions on the
remotes other capabilities, refer to the Universal Remote Control Manual.
1. The BIAS button turns on the bias and opens shunting relays that mute the input.
2. The BAL«»UNBAL button switches between the balanced and unbalanced inputs.
Note: If a power interruption occurs to the system the AMPLIFIER 10.5 defaults to bias off.
DETAILED INSTALLATION 6
PWR
TV VCR CTV AUX
RCL ENT
TV/VCR
MUTE DISP A/B
VOL– VOL+
CH–
CH+
123
456
789
0
BIAS
VOL«»BAL
MONO MONITOR PROCESSOR
BAL«»UNBAL
1
2
To Next Page
