SAFETY PRECAUTIONS 1
-
Never install or remove the power cord from the chassis
unless it has been disconnected from the AC power source
first.
!
!
e
:
WARNING
TO PREVENT ELECTRIC SHOCK, DO
NOT REMOVE COVER. NO USER SERVI-
CABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
CAUTION:
CAUTION:
THIS SYMBOL IS TO ALERT YOU OF THE
PRESENCE OF UNINSULATED DANGER-
OUS VOLTAGE WITHIN THE UNIT’S EN-
CLOSURE THAT MAY BE OF SUFFICIENT
MAGNITUDE TO CONSTITUTE A RISK OF
ELECTRIC SHOCK
THIS SYMBOL IS INTENDED TO ALERT
YOU OF THE PRESENCE OF IMPOR-
TANT OPERATING AND MAINTENANCE
INSTRUCTIONS IN THE LITERATURE AC-
COMPANYING THE UNIT
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EX-
POSE THIS UNIT TO RAIN OR MOISTURE. TO AVOID
ELECTRICAL SHOCK, DO NOT OPEN THE UNIT. REFER
SERVICING TO QUALIFIED PERSONNEL.
-
Never pull on the power cord when removing it from an AC
power source. Grasp it by the plug.
-
Do not leave the power cord connected to an AC power
source unless it is connected to the unit.
-
It is recommended that during extended periods of non-
use the unit’s power cord be unplugged from its AC power
source.
-
Route the AC power cord so that it will not be damaged or
walked on.
WARNING
CAUTION
To Next Page
Loading...
