2
* Do not direct the light upwards, as it impairs the safety of the driver in the opposite
direction.
* Keep the product away from inflammable products.
* After changing the lamp, the headlights must be aligned for correct light projection.
* After installation, adjust the headlight using appropriate tools.
* Use original socket and wires for the LED lamp power supply.
* Respect the docking settings. Only install the LED lamp, with its corresponding
fitting.
* Before installing, make sure that the laws of your city allow the use of the item.
5
Halogen Lamp
Xenon Lamp Fluorescent lamp Ultra Led lamp
COMPARISON OF LAMP LIGHTING SYSTEMS
Lamp does not light
Abnormal lighting: Connect the appropriate Canbus device (item not included) to solve
your problem.
Flickering (flashing)¹: Connect the appropriate Canbus device (item not included) to
solve your problem.
Flickering (flashing)²: If you turn on the lamp and it does not turn on right away, it only
comes back on after you restart the power (turn it on and off), make sure there is
enough space for heat dissipation inside the cover. protection.
It is the user's responsibility to proceed safely with the use of the equipment,
understand and obey all laws regarding the use of automotive lamps, informing
themselves about applicable municipal, state and federal laws.
Consult the technical specifications of your vehicle to verify the compatibility of the
product with it.
ATTENTION
DETECTING POSSIBLE PROBLEMS
To Next Page
Loading...
Need help?
General