Need help?Do you have a question about the Cofem COsensor MiniCO Series and is the answer not in the manual?
Details the function and meaning of each LED indicator on the control panel for status monitoring.
Describes the operation and purpose of the external buttons and display selection controls on the panel.
General| Technology | Electrochemical |
|---|---|
| IP Rating | IP20 |
| Measurement Range | 0-300 ppm |
| Output Signal | 4-20 mA |
| Operating temperature | -10ºC to +50ºC |
| Operating Humidity | 15% to 90% (non-condensing) |
| Alarm relay | 1 x SPDT, 2 A @ 30 VDC |
| Fault relay | 1 x SPDT, 2 A @ 30 VDC |
To Next Page
