7. Possible solutions.
Fault Possible Solution
A. Switch does not light. 1. Check plug connection to wall socket.
2. Check fuse in plug.
3. Check if hot plate becomes warm, if so
replace switch.
B. Hot plate does not become 1. Check connection to element .
warm although switch is lit. 2. If element defective, replace.
C. Brewer omits excess steam. 1. Machine may require descaling.
2. Spray nozzel may need unblocking.
3. Hose, may be bent?
4. Inlet to boiler may be blocked. Descale.
machine - if boiler still defective - replace.
D. Brewing lamp does not 1. Trip-switch has activated - reset with button.
light, machine will not brew. For possible fault / solution see C.
2. Check microswicth.
3. Check float.
E. Brewing lamp is lit but 1. Check connection to boiler.
machine will not brew. 2. Boiler unit may need replacing.
All installations must be done of an authorized personel.
To Next Page
Loading...
