Need help?Do you have a question about the Cognex DataMan 260 Series and is the answer not in the manual?
General| Frame Rate | 60 fps |
|---|---|
| Power Supply | 24V DC |
| Protection | IP65 |
| Type | Fixed-mount barcode reader |
| Technology | Image-based barcode reading |
| Operating Voltage | 24V DC ±10% |
| Image Sensor | CMOS |
| Lighting | Integrated LED lighting |
| Communication Interfaces | Ethernet, RS-232 |
| Supported Symbologies | 1D and 2D codes |
| Operating Temperature | 0° to 40° C (32° to 104° F) |
Highlights critical safety information regarding potential hazards like death, injury, or property damage.
Provides supplementary details, suggestions, and shortcuts for using the device.
General information about the DataMan 260 readers, their features, and benefits.
Details basic information on configuring and using DataMan 260 readers.
Lists available accessories like lenses, filters, light options, and cables.
Covers power supply options and mounting brackets for the DataMan 260.
Details model variants, communication modules, and Ethernet interfaces.
Illustrates the reader's physical layout and explains the function of indicator LEDs.
Step-by-step guide for switching the reader's configuration between in-line and right-angle.
Provides dimensional drawings and key technical specifications for the DataMan 260.
Step-by-step instructions for installing optical filters into the reader.
Provides instructions for installing a liquid lens accessory onto the reader.
Procedures for swapping a 6.2 mm lens for a 16 mm lens.
Steps to replace the reader's illumination module with a different color.
Mounting recommendations for optimal performance and right-angle configuration.
Data on field of view and reading distances for different lenses.
Information on I/O, RS-232, and Ethernet cables.
Details acquisition triggering methods and high-speed output line configurations.
Guides on connecting and configuring multiple readers for multi-port communication.
Steps for installing the DataMan Setup Tool and supported industrial protocols.
Procedures for setting focus position and performing reader tuning.
Explains external triggering, trigger modes, and reader training techniques.
Instructions for cleaning the reader's housing and lens cover.
Essential precautions for safe installation and operation to prevent injury or damage.
Information on regulatory compliance, safety standards, and certifications for the product.
To Next Page
