Need help?Do you have a question about the Cognex In-Sight 1740 Series and is the answer not in the manual?
General| Brand | Cognex |
|---|---|
| Model | In-Sight 1740 Series |
| Category | Rfid Systems |
| Language | English |
Overview of the In-Sight series of high-performance vision systems for reading identification marks on silicon wafers.
Information resources available to assist users with the wafer reader, including online help and support center.
Lists the required hardware components for installing the In-Sight wafer reader, including the reader, power supply, and cables.
Details the connectors and indicators on the In-Sight wafer reader, explaining their functions and port assignments.
Instructions for attaching an optional mirror for horizontal operation of the wafer reader, depending on LED configuration.
Information about the factory-set working distance and how the wafer reader can be mounted vertically or horizontally.
Details on mounting the wafer reader vertically, including working distance variations based on external LED status.
Explains how to mount the wafer reader horizontally and how working distance varies with external LEDs or expansion cable.
A table providing examples of vertical and horizontal working distances for different settings and configurations.
Guide on connecting the Ethernet and Breakout cables to the wafer reader for network communication and power.
Instructions for connecting the CAT5 Ethernet cable to the wafer reader for network communication with a switch, router, or host.
Steps for connecting the Breakout cable for power, acquisition trigger, and serial communications to the reader.
Procedure for adjusting the wafer reader's focus using the adjustment screw to achieve optimal image clarity.
Steps for mounting the wafer reader to a fixture, including torque recommendations and alignment tips.
Explanation of horizontal lines observed in images as artifacts of the optical design and how to manage them.
Details on the wafer reader's I/O capabilities, including acquisition trigger input and user-configurable LED outputs.
Specifications for the acquisition trigger input, including voltage, current, and delay parameters, and schematic.
Details the power requirements and consumption for the In-Sight wafer reader models under various operating conditions.
Information on the material used for the wafer reader housing and its mounting hole specifications and torque limits.
Physical dimensions and weight specifications for the In-Sight wafer reader, including options with a mirror.
Operating and storage temperature ranges, and humidity limits for the wafer reader.
Lists the regulatory standards and certifications met by the In-Sight wafer reader, including CE, FCC, and RoHS.
Details the wafer reader's capability in reading various mark types, including SEMI standards and non-SEMI standards.
Details the wiring specifications for CAT5/CAT5e Ethernet cables used to connect the wafer reader to network devices.
Provides pin assignments and wire color details for the 24VDC port breakout cable used for power, serial communication, and trigger.
Details the pin-out for the I/O Module cable used to connect the wafer reader to the optional CIO-1400 I/O module.
Information on the expansion port, its pin-out, and its function for supplying power and control for external lighting.
Presents dimensional drawings for the In-Sight 1740 series wafer readers, showing overall size and mounting hole locations.
To Next Page