Need help?Do you have a question about the Cognex In-Sight 1742 and is the answer not in the manual?
Lists the necessary hardware components for installing the In-Sight wafer reader and optional accessories.
Details the connectors and indicators on the In-Sight Wafer Reader, explaining their functions.
Describes how to connect the Ethernet and 24VDC ports for network communication and power/trigger.
Provides instructions for connecting the Ethernet cable to a switch/router or directly to a host.
Details the steps for connecting the breakout cable for power, acquisition trigger, and serial communications.
Explains how to adjust the focus of the wafer reader using the application and adjustment screw.
Provides a procedure for mounting the wafer reader to a fixture, including torque and mounting considerations.
Guides users on adjusting the wafer reader's angle to achieve an optimal bright field image.
Lists the necessary hardware components for installing the In-Sight wafer reader and optional accessories.
Details the connectors and indicators on the In-Sight Wafer Reader, explaining their functions.
Describes how to connect the Ethernet and 24VDC ports for network communication and power/trigger.
Provides instructions for connecting the Ethernet cable to a switch/router or directly to a host.
Details the steps for connecting the breakout cable for power, acquisition trigger, and serial communications.
Explains how to adjust the focus of the wafer reader using the application and adjustment screw.
Provides a procedure for mounting the wafer reader to a fixture, including torque and mounting considerations.
Guides users on adjusting the wafer reader's angle to achieve an optimal bright field image.
General| Model | In-Sight 1742 |
|---|---|
| Frame Rate | 60 fps |
| Operating System | In-Sight |
| Connectivity | Gigabit Ethernet |
| Barcode | Yes |
| Protocols | TCP/IP, EtherNet/IP |
To Next Page