Need help?Do you have a question about the Cognex In-Sight 5110 and is the answer not in the manual?
Attaching the C-Mount lens to the vision system, including protective film removal.
Connecting the Ethernet cable from the vision system to a switch, router, or PC.
Connecting the I/O Breakout cable, including power and common terminals.
Installing the In-Sight Explorer software and accessing the associated manual.
Connecting to the In-Sight vision system using the In-Sight Explorer software interface.
Attaching the C-Mount lens to the vision system, including protective film removal.
Connecting the Ethernet cable from the vision system to a switch, router, or PC.
Connecting the I/O Breakout cable, including power and common terminals.
Installing the In-Sight Explorer software and accessing the associated manual.
Connecting to the In-Sight vision system using the In-Sight Explorer software interface.
General| Resolution | 640 x 480 |
|---|---|
| Frame Rate | 60 fps |
| Lens Mount | C-Mount |
| Connectivity | Ethernet |
| Sensor Type | CCD |
| Operating Temperature | 0°C to 45°C |
| Operating System | In-Sight |
| Image Sensor | 1/3" CCD |
| Protocols | EtherNet/IP |
| Power Requirements | 24V DC |
| Communication Interfaces | Ethernet |
| Lighting | Integrated LED lighting |
To Next Page
