Need help?Do you have a question about the Cognex In-Sight D902 and is the answer not in the manual?
General| Model | In-Sight D902 |
|---|---|
| Lens Mount | C-Mount |
| Connectivity | Gigabit Ethernet |
| Power Supply | 24 VDC |
| Sensor Type | CMOS |
| Protection Rating | IP67 |
| Shutter Type | Global Shutter |
| Memory | 512 MB |
| Lighting | Integrated LED lighting |
| Operating Temperature | 0°C to 40°C |
| Processor | Dual-core |
| Communication Interface | Ethernet/IP, PROFINET |
Provides information on safety and regulatory compliance for the vision system.
Steps to install a C-Mount lens and cover, including restrictions and cover specifications.
Steps to install a C-Mount lens and cover (LG model), including restrictions and cover specifications.
Procedure for physically mounting the vision system to a surface, including screw depth and grounding.
Instructions for connecting the external light cable to the vision system and lighting device.
Steps to connect the breakout cable for I/O devices and power, including safety precautions.
Procedure for connecting the Ethernet cable to the vision system and network device.
Instructions for cleaning the image sensor window using air duster and alcohol, avoiding direct touch.
Procedure for cleaning the lens cover using air duster and isopropyl alcohol, avoiding scratches.
To Next Page
