Need help?Do you have a question about the Cognex In-Sight 8000 Series and is the answer not in the manual?
General| Image Sensor | CMOS |
|---|---|
| Illumination | Integrated LEDs (optional) |
| Communication | Ethernet (GigE) |
| Protocols | TCP/IP, EtherNet/IP, PROFINET |
| Operating Temperature | 0°C to 45°C |
| Connectivity | Ethernet |
| Communication Interfaces | Ethernet, I/O |
Manufacturer details and general compliance statements.
Compliance with EU, FCC, and Korea KC regulations.
Covers power requirements, industrial use, and environmental hazards.
Advises on laser light, modifications, and cable handling.
Identifies mounting bracket, lens, and cables for specific models.
Identifies components and ferrite requirement for the 8405 model.
Identifies components for the 8505P model.
Provides notes and cautions regarding cable connections.
Instructions for attaching the mounting bracket and grounding the system.
Steps for attaching a C-Mount lens to the vision system.
Explains breakout cable connections and ferrite usage for the 8405 model.
Covers requirements for shielded Ethernet cables and grounding the shield.
Details connecting to PoE injectors/switches and power requirements.
Instructions for installing In-Sight Explorer software and logging into the system.
Details power, environmental, and shock/vibration specs for 8100/8100C models.
Details power, environmental, and shock/vibration specs for 8200/8200C models.
Details power, environmental, and shock/vibration specs for 8400, 8401, and 8402 models.
Details power, environmental, and shock/vibration specs for the 8405 model.
Details power, environmental, and shock/vibration specs for the 8505P model.
To Next Page
