Cointra CPA Series User Manual

cod. 3541S050 - Rev. 01 - 07/201911
EN
CPA
declines all liability for property damage or injuries caused by unauthorized persons
tampering with the unit.
3.1 ADJUSTMENTS
3.1.1 Gas conversion
Conversion of the unit to a
type of gas other than the
factory setting must be
performed by an authorized
technician, using original
components and in
compliance with current
regulations in the country
where the unit will be used.
The unit can operate with methane gas, LPG or Propa-
fig. 14
- ne-Air. It is factory-set for one of the
two types of gas, as indicated on the packaging
and technical data plate. To operate the unit with
another type of gas, a conversion kit must be
used.

Cointra CPA Series Specifications

General

Fuel Type	Natural Gas or LPG
Ignition	Electronic ignition
Gas Connection	1/2"
Water Connection	1/2"
Safety Features	Flame failure device, overheat protection
Mounting	Wall-mounted