Cointra CPA Series User Manual

cod. 3541S050 - Rev. 01 - 07/201913
EN
CPA
• The electrode is free of deposits and
properly positioned.
fig. 17 - Electrode position
• The gas and water systems are perfectly
tight.
• The gas delivery and operating pressure
values are as indicated on the tables.
A soft, damp cloth may be used to clean the
casing and exterior parts of the heater, using
soapy water if necessary. Do not use
abrasive detergents or solvents.
3.3.2 Opening the casing To open
the casing:
fig. 18 - Opening the casing

Cointra CPA Series Specifications

General

Fuel Type	Natural Gas or LPG
Ignition	Electronic ignition
Gas Connection	1/2"
Water Connection	1/2"
Safety Features	Flame failure device, overheat protection
Mounting	Wall-mounted