Cola BEAUTY - User Manual

Questions and Answers

N
Nicole LeJul 29, 2025
What to do if my Cola BEAUTY Stove shows AL 5 NO IGNITION?
- D
  deborahyangJul 30, 2025
  If your Cola Stove displays an AL 5 NO IGNITION error, first check if the pellet hopper is empty and refill if necessary. Then, review the lighting procedures. If the issue persists, it may require further inspection by a service center.
K
kayla16Aug 4, 2025
Why does my Cola BEAUTY display AL 6 NO PELLETS?
- S
  shelleycarrollAug 4, 2025
  The AL 6 NO PELLETS error on your Cola Stove indicates that the pellet hopper might be empty, the pellet feed gearmotor may need adjustment, or the gearmotor isn't feeding pellets. Check the pellet level in the hopper and refill if needed. Also, adjust the pellet flow. If problems persist, further assistance from a service center is needed.
Q
qwadeAug 10, 2025
How to reset AL 7 THERMAL SAF error on Cola Stove?
- S
  Sharon VelezAug 10, 2025
  If your Cola Stove shows an AL 7 THERMAL SAF error, it means the safety thermostat detected overheating in the hopper's bottom part, blocking the gearmotor. First, investigate the cause of the overheating. Then, reset the safety thermostat by pressing the reset button.
W
William MacdonaldAug 16, 2025
What to do if my Cola Stove displays AL 3 HOT FUMES?
- E
  Ellen YoungAug 16, 2025
  If your Cola Stove displays the AL 3 HOT FUMES error, it could be due to a faulty tangential fan, no power to the tangential fan, or too many pellets. Adjust the pellet flow to reduce the amount being burned. If the problem continues, further inspection by a service center is needed.
E
Elizabeth NelsonAug 22, 2025
What to do if my Cola BEAUTY Stove shows AL 1 POWER FAILURE?
- R
  Rebecca JohnsAug 22, 2025
  If your Cola Stove displays the AL 1 POWER FAILURE error, it indicates there's no power during the lighting stage. Turn the stove OFF by pressing the button P4 and repeat the lighting procedure. If the issue continues, it may require further inspection by a service center.