Coleman 300101 - Assembly and Operating Instructions

15 16
OPERATING INSTRUCTIONS
CAUTION
Neveruse:
•Bleach,chlorineproductsandothercorrosivechemicals
•Liquidscontainingsolvents(i.e.,paintthinners,gasoline,oils)
•Tri-sodiumphosphateproducts
•Ammoniaproducts
•Acid-basedproducts
Thesechemicalswillharmtheunitandwilldamagethesurfacebeing
cleaned.
CAUTION
Draingunassemblyofanyremainingwater.Aimgundownwardsandsqueeze
trigger.
WINTERIZING AND LONG-TERM STORAGE
Optimum Winterizing Procedure
Winterizing your pressure washer will help protect and prolong its life. We strongly
recommend you follow the below steps using Pressure Washer Antifreeze (039-8602-0).
This will keep the internal parts lubricated, protected from rust, and prevents the pump from
freezing.
1. Connect the pump saver hose onto the adaptor and quick-connect coupling.
2. Depress button on top of pump saver container.
3. Continue until uid exits the pressure hose.
4. Remove the hose from pump inlet.
Quick Winterizing Procedure
If you cannot do the Optimum
Winterizing procedure, you can still
protect your pressure washer from winter
damage by doing the below:
1. Disconnect all water connections.
2. Turn on the machine for a few seconds,
until the remaining water in the pump
exits. Turn o immediately.
3. Do not allow high-pressure hose to
become kinked.
4. Store the machine and accessories in
a room that does not reach freezing
temperatures. Do not store near
furnace or other sources of heat as it
may dry out the pump seals.
PUMP
SAVER
Recommended: Pressure Washer
Antifreeze (039-8602-0)