Need help?Do you have a question about the Coleman 90402E and is the answer not in the manual?
Pump must not be used while people are in the pool. Connect to a grounding type receptacle.
Children must be closely supervised when using this product.
Test GFCI before use; push test button to interrupt power, reset to restore.
Pool must be 6ft (1.8m) from electrical outlet; avoid water near portable appliances.
Do not bury cord. Discard damaged power cords. Avoid extension cords.
Pump is for storable pools only. Do not use with permanently installed pools.
Turn off power. Do not modify plug. Consult electrician for grounding questions.
Place on level ground, ensure ventilation, protect from extreme weather.
No chemicals in pump. Adult assembly. Use identical replacement parts for servicing.
Connect only to grounded receptacles protected by GFCI. Mount to base.
Follow 6 steps for safety, including cord inspection and dry hands when plugging in.
This device complies with FCC Rules Part 15 regarding radio frequency interference.
Visual diagram identifying all parts of the filter pump assembly with labels.
Table detailing each component, its part number, and the quantity required for assembly.
Illustrations showing the sequential steps for assembling the filter pump system.
Mount pump on a stable, heavy pedestal with specific hole dimensions for secure installation.
Steps for operating the pump: open air valve, fill, close valve, test GFCI.
Detailed steps to test the GFCI plug by pressing the test and reset buttons.
Ensure pool valves are covered by water before operating pump to prevent damage.
Clean or replace filter cartridge regularly for optimal performance and sanitation.
Instructions for unplugging, disassembling, drying, and storing the pump safely.
Information on where to find details regarding the pump's warranty coverage.
Pump must not be used while people are in the pool. Connect to a grounding type receptacle.
Children must be closely supervised when using this product.
Test GFCI before use; push test button to interrupt power, reset to restore.
Pool must be 6ft (1.8m) from electrical outlet; avoid water near portable appliances.
Do not bury cord. Discard damaged power cords. Avoid extension cords.
Pump is for storable pools only. Do not use with permanently installed pools.
Turn off power. Do not modify plug. Consult electrician for grounding questions.
Place on level ground, ensure ventilation, protect from extreme weather.
No chemicals in pump. Adult assembly. Use identical replacement parts for servicing.
Connect only to grounded receptacles protected by GFCI. Mount to base.
Follow 6 steps for safety, including cord inspection and dry hands when plugging in.
This device complies with FCC Rules Part 15 regarding radio frequency interference.
Visual diagram identifying all parts of the filter pump assembly with labels.
Table detailing each component, its part number, and the quantity required for assembly.
Illustrations showing the sequential steps for assembling the filter pump system.
Mount pump on a stable, heavy pedestal with specific hole dimensions for secure installation.
Steps for operating the pump: open air valve, fill, close valve, test GFCI.
Detailed steps to test the GFCI plug by pressing the test and reset buttons.
Ensure pool valves are covered by water before operating pump to prevent damage.
Clean or replace filter cartridge regularly for optimal performance and sanitation.
Instructions for unplugging, disassembling, drying, and storing the pump safely.
Information on where to find details regarding the pump's warranty coverage.
This document is the owner's manual for the Coleman 90402E Filter Pump. It provides essential information for the safe installation, operation, and maintenance of the filter pump, specifically designed for use with storable swimming pools.
The Coleman 90402E Filter Pump is designed to circulate and filter water in storable swimming pools, helping to maintain water cleanliness and hygiene. It operates by drawing water from the pool, passing it through a filter cartridge to remove debris, and then returning the filtered water to the pool. The pump is equipped with a Ground-Fault Circuit-Interrupter (GFCI) for electrical safety, which is a critical feature for preventing electric shock in wet environments.
General| Brand | Coleman |
|---|---|
| Model | 90402E |
| Category | Water Pump |
| Language | English |
To Next Page
